HP HPE0-V14 Exam Dumps

HP HPE0-V14 Sample Question Answers

Question # 1

A customer needs a solution that will maintain data availability in their campus location.They require a multi-node system that can sustain multiple failures, including a full building outage.Which HPE storage platform meets the customer’s needs?

A. Nimble
B. StoreVirtual
C. StoreEasy
D. MSA

Show Answer

Question # 2

A customer plans to use HPE ProLiant servers for an application that requires low latency for all components.Which workload profile should the customer use?

A. Mission Critical
B. Virtualization – Max Performance
C. I/O Throughput
D. Transactional Application Processing

Show Answer

Question # 3

A customer is planning an upgrade to their network. They need to combine multiple existing switches into one virtual device.Which technology should the customer configure on their existing switches?

A. Multi-chassis Link Aggregation (MLAG)
B. Link Aggregation Control Protocol (LACP)
C. Rapid Spanning Tree Protocol (RSTP)
D. Intelligent Resilient Framework (IRF)

Show Answer

Question # 4

Which HPE tool can you use to ensure a consistent level of firmware exists across all BladeSystem interconnects and servers in an environment?

A. InfoSight
B. OneView
C. Insight Remote Support
D. iLO Federation

Show Answer

Question # 5

You are installing new drives into the internal cage of a HPE ProLiant DL380 server.How is the drive device number set?

A. The Smart Array controller assigns the device number automatically based on the bay
B. HPE OneView uses the server profile to assign the device number
C. The operating system assigns the device number automatically based on the drive installation order
D. You must use Smart Storage Administrator to assign the device number

Show Answer

Question # 6

You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

A. Room temperature must not exceed 35 °C (95 °F)
B. Rack tie kit should be installed on the rack for proper airflow
C. UPSs should be installed at the top of the rack for top mounted power feed
D. There must be at least a 10 cm (4 in) clearance space at the front and back of the components within the racks
E. Rack doors must be unlocked for easy component removal and maintenance

Show Answer

Question # 7

You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.How should you connect the switch to the network?

A. Configure multiple user IDs or roles for the console connection
B. Configure the management IP address on the switch and enable Telnet or SSH access
C. Use a dedicated console cable to create a dedicated management network for every user
D. Connect the switch to the network by using the serial cable that ships with the switch

Show Answer

Question # 8

A customer requires a MSA storage system that they use for archiving data. The system needs to provide a large amount of storage.Which drive type meets the customer’s needs?

A. Mixed-use SSD
B. SAS midline
C. Read-intensive SSD
D. SATA nearline

Show Answer

Question # 9

You are installing a HPE MSA storage system and need to connect the power cooling module (PCM).What should you do to ensure power redundancy?

A. Ensure that a physical service processor is properly connected to each PCM
B. Verify that each cooling fan is cabled to a separate controller
C. Connect each PCM within a shelf to a different power distribution unit (PDU)
D. Connect redundant power cords from the PCM controller to independent power supplies

Show Answer

Question # 10

Which HPE tool can securely erase current content of a server and help with consistent and easy operating system installation?

A. HPE System Insight Manager
B. HPE Intelligent Management Center (IMC)
C. HPE OneView
D. HPE Intelligent Provisioning

Show Answer

Question # 11

You are configuring a FlexFabric switch for a customer environment. The customer has requested specific SFP+ transceivers, power options, and cables.Which HPE tool enables you to select and configure a switch according to precise specifications?

A. Single Point of Connectivity Knowledge (SPOCK)
B. Networking Online Configurator
C. One Config Simple (OCS)
D. Switch Selector

Show Answer

Question # 12

You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.Which tool should you use?

A. Insight Online
B. InfoSight
C. OS Event Viewer
D. Integrated Management Log

Show Answer

Question # 13

Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?

A. Proactive Care 24x7
B. Proactive Care 24x7 with CTR
C. Foundation Care 24x7 with DMR
D. Foundation Care 24x7

Show Answer

Question # 14

A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.Which HPE server family meets the customer’s needs?

A. ProLiant ML
B. ProLiant DL
C. ProLiant BL
D. ProLiant MicroServer

Show Answer

Question # 15

You are designing a system for a customer that has a contract with a government agency.The contract requires the highest level of security algorithms possible.Which HPE ProLiant Gen10 feature set will address this customer’s needs?

A. CNSA mode
B. FIPS 140-2 mode
C. high security mode
D. production mode

Show Answer

Question # 16

A customer requires a software-defined storage solution.Which storage solution meets the customer’s needs?

A. HPE MSA
B. HPE StoreVirtual VSA
C. HPE 3PAR StoreServ
D. HPE Nimble Storage

Show Answer

Question # 17

A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.Which HPE solution meets this customer’s requirements?

A. HPE Nimble Storage
B. HPE SimpliVity
C. HPE MSA
D. HPE StoreVirtual VSA

Show Answer

Question # 18

You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans constantly run at 100%.Which action should you take first?

A. Update all system firmware
B. Replace all cooling fans
C. Reseat drive blanks
D. Unplug all but one cooling fan

Show Answer

Question # 19

A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?

A. Jumbo frames
B. Oversubscription
C. SMB Direct
D. Remote Data Memory Access

Show Answer

Question # 20

You need to install 10 HPE ProLiant servers in an environment without DHCP.Which tool can you use to set up remote management?

A. Intelligent Provisioning
B. UEFI System Utilities
C. Intelligent Management Center
D. iLO 5 Configuration Utility

Show Answer

Question # 21

A customer needs to know if the storage solution you proposed contains components that are compatible with existing products currently in the data center.Which HPE resource should you use to provide this information?

A. Storage Size 
B. One Config Advance (OCA)
C. One Config Simple (OCS)
D. Single Point of Connectivity Knowledge (SPOCK)

Show Answer

Question # 22

You are installing an HPE StoreOnce backup system in a customer’s environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.How must you configure the StoreOnce system to meet the customer’s requirements?

A. block device
B. replication target
C. NDMP target
D. VTL device

Show Answer

Question # 23

You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.Which HPE management solution meets the customer’s needs?

A. Centralized Management Console
B. Intelligent Resilient Framework
C. Intelligent Management Center
D. InfoSight

Show Answer

Question # 24

A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.Which action should the customer take first?

A. Access InfoSight for recommendations
B. Access the SSMC for upgrade advice
C. Access the clustering feature in the CMC to configure active/active clustering
D. Access Smart Storage Administrator to configure additional storage resources

Show Answer

Question # 25

A customer has a branch office that needs a local file server. The branch office does not have a server rack. For backup performance, the server must have two processors.Which HPE server should the company install?

A. ProLiant ML350 Gen10
B. ProLiant ML110 Gen9
C. ProLiant BL460c Gen10
D. ProLiant DL360 Gen10

Show Answer

Question # 26

A customer wants to decrease problem resolution time on their HPE infrastructure.Why would this customer benefit from Insight Remote Support?

A. It provides event diagnosis and automatic, secure submission of hardware event notifications to HPE.
B. It provides health monitoring and alerting and suggests resolutions for common issues.
C. It monitors 1600 system parameters and applies analytics to predict problems before they can lead to system or component failure.
D. It maintains an up-to-date change log by recording hardware and system changes in real-time.

Show Answer

Question # 27

You are creating an internal array on an HPE ProLiant server.What can you do to maximize the storage space efficiency?

A. Populate drive bays with the smallest-capacity drive first.
B. Install drives that have the same capacity.
C. Match the device numbers for the drives with their bay numbers.
D. Populate drive bays with the largest-capacity drive first.

Show Answer

Question # 28

Which two HPE applications are installed on Windows operating systems with intelligent Provisioning? (Choose two.)

A. Lights-Out Online Configuration Utility
B. OneView
C. UEFI Control Suite
D. Intelligent Management Center
E. Smart Storage Administrator

Show Answer

Question # 29

A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

A. It will enable two-factor authentication when users log on to iLO.
B. It will enhance iLO security by leveraging the key stored in the silicon root of trust.
C. It will allow the servers’ iLO to detect compromised firmware code.
D. It will enable Zero Sign In to log in to iLO without entering a user name and password.

Show Answer

Question # 30

In which layer of the OSI model would you find an IP address?

A. Application
B. Network
C. Physical
D. Data link

Show Answer